Sig Guy's Install video HERE!

Our Sig Sauer® P365 for California and magazine safety State compatibility replacement triggers are engineered to reduce the overall trigger pull weight, pre and post travel and reset, just as the many other aftermarket triggers on the market today, yet no assembling and disassembling multiple times for tuning. Fits state compliant magazine safeties. What you’ll also get from Ramm Tactical, is a Sig Sauer® replacement trigger that produces the advantage of keeping the factory springs that comes with the factory Sig Sauer® in the first place. If you reduce the pull weight by simply changing to lighter striker springs, you may end up with an unreliable and possibly unstable firearm. Our trigger kit design takes out maximum pre travel without compromising the trigger safety plunger and drop safeties designed in the factory Sig P365 pistol. The trigger comes equipped with a post travel set screw (factory adjusted) so you may dial in the correct amount of post travel necessary to achieve full travel for full ignition with desired rearward travel. This makes the reset as short as possible while keeping your P365 reliable and safe.

The beauty of innovation is trigger geometry while maintaining all the factory springs for perfect functionality. Factory Sig Sauer® engineers have made the reliability and repeatability of Sig Sauer® firearms consistently safe and reliable by using designed springs that allow full ignition every pull of the trigger and quick positive resets to make for a workhorse firearm. We have taken the factory design and by utilizing a better leveraged force, reduced the trigger pull weight and length of pull. You will experience the reliability and repeatability of a factory Sig Sauer® but with less trigger pull weight and less trigger travel than the factory Sig Sauer® P365 trigger. Plus, no light primer strikes, no long, mushy trigger pulls and no sloppy, sluggish resets.

SPECS:

• California compatible. Click HERE for NON California Model.
• See options below for Sig Sauer model availability
• For use in factory Sig Sauer® P365 handguns and variants “only”
• Shoe Material: 4140 (Black PVD Coating)

Trigger Kit Includes:

• Ramm Tactical Leverage trigger assembly with pre and over-travel set screw
  • Flat ergonomic trigger shoe
  • 3.5-4.5lb trigger pull weight
  • Use your factory thumb safety lever
  • RAMM Tactical slide end cap
  • Sear spring, trigger return spring and safety plunger spring
  • Proprietary take down lever
  • Proprietary sear
  • Pre/Post travel adjustment .050″ hex key
  • Extra Blue Loctite (Only use if screws are loose)
  • Use note field during checkout for pull weight or special instructions
  • Flyer with QR Code Installation Video Linkk

** THIS HIY CAN BE USED WITH YOUR FACTORY SPRINGS ALSO

**We highly recommend installation be done by a certified gunsmith.

**Flyer with QR Code Installation Video Link: https://youtu.be/gtaFOVtgYIc