SIGMECH P320 5 Piece CNC Stainless Steel Pin Kit
 
Designed by Sig Mechanics and manufactured as a direct replacement to the SIG factory parts. Fits in ALL P320 FCUs including: 9mm | .45ACP | .40SW | and .357SIG.
 
Kit Inclides:
Safety Lever Pivot Pin - Supports the safety lever in the FCU. Its purpose is to provide a pivot point for the lever to rotate around as the operator pulls or releases the trigger.
Slide Catch Lever Pin -  Has various functions in the P320. Its purpose is to provide a pivot point for the slide catch lever to rotate around as the operator lifts or releases the lever itself, but it also acts as a hard stop for the barrel under lug to catch onto during the recoil of the slide.
Sear Lever Pivot Pin - supports the sear in the FCU. Its purpose is to provide a pivot point for the sear to rotate around as the operator pulls or releases the trigger. The Sear Lever Pivot Pin also acts as a stop point of the P320 has a manual safety installed.
 Trigger Stop Pin - Provides a hard stop for the trigger during trigger travel.
Sear Housing Roll Pin - Designed by SIGMECH for heavy duty industrial applications. This hardened, chromed, stainless steel version of the roll pin has a Rockwell Hardness Rating of ~53, making it extremely wear resistant for long term use in your P320. The roll pins are made in an ISO compliant factory meaning that each pin is manufactured to exact dimensions, tolerance and design. The ends are also chamfered for easy installation in the FCU frame.
 
The Sig Mechanics "Over-Engineered" Safety Lever Pivot Pin (as the name suggests), is purposefully manufactured to be "over-engineered" for it's intended application. This pin is CNC machined (Not a MIM part), out of 4150 bar stock steel for heavy duty industrial use, chromed for additional durability and smoothness and hardened to HRC ~50, making it extremely wear resistant for long term use in your P320. It's essentially designed to exceed the parts' required, real world, mechanical need and guarantee quality and performance. All SIGMECH OE Parts come with a Limited Lifetime Warranty.
 
NOTE: The sear housing roll pin is a coiled metal part made to "deform" when it enters through an opening in order to "press-fit" and "fill" the hole its being put into. Due to the deforming of the metal Sig Sauer (as part of their armourers course) considers the roll pin to be a single-use part and recommends it should be replaced with a new roll pin any time the FCU is fully disassembled and the original roll pin is removed.
 
MADE IN CANADA