Sig Guy 365 Multi-Function Tool - 365MFT
Click HERE to see video of how it works!!
SIG FACTORY NON-MANUAL SAFETY XMACRO GRIP MODULES ARE THICKER THAN ALL OTHER GRIP MODULES. PLEASE WATCH THE ABOVE VIDEO AND SKIP FORWARD TO THE 15:30 MARK FOR EXPLAINATION.
If you are adding a manual safety to your 365 you will also need the following 3 parts:
- https://www.sigguy.com/product-page/lever-manual-safety
- https://www.sigguy.com/product-page/manual-safety-detent-spring-p365-ms
- https://www.sigguy.com/product-page/manual-safety-detent-p365-ms
The 365 Multi-Function Tool (365MFT) is a tool that provides the 3 different functions:
- Manual thumb safety notch cutout adapter. Do you have multilple grips to cut and need additional adapters? Click HERE!
- Takedown lever assist tool (USE COMMON SENSE WHEN USING THIS TO ROTATE YOUR TAKEDOWN LEVER. IF YOUR TAKEDOWN LEVER TURNS SO HARD THAT IT WILL BREAK THIS TOOL THEN THERE IS SOMETHING WRONG WITH YOUR 365) IF A MORE DURABLE TAKEDOWN LEVER TOOL IS NEEDED YOU CAN FIND ONE HERE.
- Simulated FCU
Set includes thr following:
- 365 Multi-Function Simulated FCU Body
- Safety Notch Cutout Adapter
- Stainless Steel Retaining Pin
- 1/16" Drill Bit
- Exacto Blade Knife
- Emery Board
1. Do you want to add a manual thumb safety to your P365? By using the 365MFT you can easily convert your non safetry polymer grip module into a manual safety grip module. Simply place the simulated FCU body into your grip module, attach the safety notch cutout adapter then use the provided holes as a drill template! By using the manual safety cutout adapter you will know exactly where the manual safety notches are located. Simply drill and cut the notches with the included 1/16 drill bit and Exacto Blade. Clean up after with the included emery board and you are all done!
2. This tool can be used to help rotate those hard to turn takedoen levers. Some turn easy and others are more difficult. Using this tool makes those difficult ones rotate easily. This tool has its limitations so do not use excessive force!
3. Do you have multiple configurations for your 365 but you only have 1 fire control unit? No problem! Simply use the 365MFT as a simulated FCU to assemble and store those other grips and slides. Use the 365EMT tool with one of our magazine mount pistol stands and now you have the BEST way to store those additional 365s that you do not have FCUs for!
ALL TOOLS ARE HAND TOOLS ONLY! DO NOT USE HAMMER WITH TOOLS. BROKEN TOOLS BECAUSE OF ABUSE ARE NOT WARRANTIED. THIS TOOL IS CLASSIFIED AS A CONSUMABLE.
This is a 3D printed product. 3D prints are not the same as injection molding. Layer lines and other characteristics associated with 3D printing may or may not be visible. These types of physical characteristics are purely ascetics and are not cindered flaws as the product will still function as it was intended. All 3D printed products on sigguy.com are considered to be consumables. If you take care of them they will last longer. If you use them in any other way then they are intended to be used ten they will not last as long.
Made in New Hampshire
